document number: 34189 for tec hnical questions, contact: magnetics@vishay.com www.vishay.com revision: 15-jul-09 1 inductors, military, mil-prf-15305 qualified, type lt, molded, axial leaded ms7508x, ms18130, ms14046, ms90538, ms75101 vishay dale features ? wide inductance range in small package ? flame retardant coating ? precision perfo rmance, excellent reliability, sturdy construction ? epoxy molded construction provides superior moisture protection electrical specifications inductance tolerance: 10 %, standard i nsulation resistance: 1000 m minimum per mil-std-202, method 302, test condition b dielectric strength: per mil-std-202, method 301: 1000 v ac mechanical specifications terminal strength: per mil-std-202, method 211, test condition a: 5 pounds pull and twist weight: ms75083 = 0.30 g maximum ms75084 = 0.30 g maximum ms75085 = 0.30 g maximum ms18130 = 0.65 g maximum ms14046 = 0.65 g maximum ms90538 = 0.65 g maximum ms75101 = 0.95 g maximum material specifications encapsulant: epoxy standard terminal: ms75083, ms75084, ms75085, 24 awg; ms18130, ms14046, ms90538, ms75101, 22 awg; tinned copper test equipment (1) ? h/p 4342a q-meter ? measurements corporation megacycle meter, model 59 ? wheatstone bridge note (1) test procedures per mil-prf-15305 inductance range and military standard military standard inductance range mil. range (h) (in bold face) classification from to grade class ms75083 0.10 1 1b ms75084 1.2 27 1a ms75085 33 1000 1a ms18130 0.15 4.7 1b ms14046 5.6 33 1a ms90538 36 240 1a ms75101 3.3 27 1a dimensions in inches [millimeters] model a (dia.) b c (typ.) d (dia.) ms75083 max. 0.105 [2.67] 0.260 [6.60] 1.63 [41.40] 0.0215 [0.546] min. 0.085 [2.16] 0.240 [6.10] 1.25 [31.75] 0.0185 [0.470] ms75084 max. 0.105 [2.67] 0.260 [6.60] 1.63 [41.40] 0.0215 [0.546] min. 0.085 [2.16] 0.240 [6.10] 1.25 [31.75] 0.0185 [0.470] ms75085 max. 0.105 [2.67] 0.260 [6.60] 1.63 [41.40] 0.0215 [0.546] min. 0.085 [2.16] 0.240 [6.10] 1.25 [31.75] 0.0185 [0.470] ms83130 max. 0.165 [4.19] 0.385 [9.78] 1.63 [41.40] 0.027 [0.686] min. 0.145 [3.68] 0.365 [9.27] 1.25 [31.75] 0.023 [0.584] ms14046 max. 0.165 [4.19] 0.385 [9.78] 1.63 [41.40] 0.027 [0.686] min. 0.145 [3.68] 0.365 [9.27] 1.25 [31.75] 0.023 [0.584] ms90538 max. 0.165 [4.19] 0.385 [9.78] 1.63 [41.40] 0.027 [0.686] min. 0.145 [3.68] 0.365 [9.27] 1.25 [31.75] 0.023 [0.584] ms75101 max. 0.200 [5.08] 0.450 [11.43] 1.63 [41.40] 0.027 [0.686] min. 0.180 [4.57] 0.430 [10.92] 1.25 [31.75] 0.023 [0.584] b c typ. a dia. d dia. environmental performance test conditions specifications barometric pressure c mil-std-202, method 105 thermal shock a-1 mil-std-202, method 107 flammability - mil-std-202, method 111 overload - mil-prf-15305 low temperature storage - mil-prf-15305 resistance to soldering heat a mil-std-202, method 210 resistance to solvents - mil-std-202, method 215
www.vishay.com for technical questions, contact: magnetics@vishay.com document number: 34189 2 revision: 15-jul-09 ms7508x, ms18130, ms14046, ms90538, ms75101 vishay dale inductors, military, mil-prf- 15305 qualified, type lt, molded, axial leaded standard electrical specifications model ind. (h) tol. (%) military standard military type q min. test freq. l and q (mhz) srf min. (mhz) (1) dcr max. ( ) rated dc current (ma) (2) ms75083 lt4k phenolic core 0.10 10 - 1 339 40 25.0 680.0 0.08 1350 0.12 10 - 2 340 40 25.0 640.0 0.09 1270 0.15 10 - 3 341 38 25.0 600.0 0.10 1200 0.18 10 - 4 342 35 25.0 550.0 0.12 1105 0.22 10 - 5 343 33 25.0 510.0 0.14 1025 0.27 10 - 6 344 33 25.0 430.0 0.16 960 0.33 10 - 7 345 30 25.0 410.0 0.22 815 0.39 10 - 8 346 30 25.0 365.0 0.30 700 0.47 10 - 9 347 30 25.0 330.0 0.35 650 0.56 10 - 10 348 30 25.0 300.0 0.50 545 0.68 10 - 11 349 28 25.0 275.0 0.60 495 0.82 10 - 12 350 28 25.0 250.0 0.85 415 1.0 10 - 13 351 25 25.0 230.0 1.0 385 ms75084 lt10k iron core 1.2 10 - 1 061 25 7.9 150.0 0.18 590 1.5 10 - 2 062 28 7.9 140.0 0.22 535 1.8 10 - 3 063 30 7.9 125.0 0.30 455 2.2 10 - 4 064 30 7.9 115.0 0.40 395 2.7 10 - 5 065 37 7.9 100.0 0.55 355 3.3 10 - 6 066 45 7.9 90.0 0.85 270 3.9 10 - 7 067 45 7.9 80.0 1.0 250 4.7 10 - 8 068 45 7.9 75.0 1.2 230 5.6 10 - 9 069 50 7.9 65.0 1.8 185 6.8 10 - 10 070 50 7.9 60.0 2.0 175 8.2 10 - 11 071 55 7.9 55.0 2.7 155 10.0 10 - 12 072 55 7.9 50.0 3.7 130 12.0 10 - 13 073 45 2.5 40.0 2.7 155 15.0 10 - 14 074 40 2.5 35.0 2.8 150 18.0 10 - 15 075 50 2.5 30.0 3.1 145 22.0 10 - 16 076 50 2.5 25.0 3.3 140 27.0 10 - 17 077 50 2.5 20.0 3.5 135 ms75085 lt10k ferrite core 33.0 10 - 1 078 45 2.5 24.0 3.4 130 39.0 10 - 2 079 45 2.5 22.0 3.6 125 47.0 10 - 3 080 45 2.5 20.0 4.5 110 56.0 10 - 4 081 45 2.5 18.0 5.7 100 68.0 10 - 5 082 50 2.5 15.0 6.7 92 82.0 10 - 6 083 50 2.5 14.0 7.3 88 100.0 10 - 7 084 50 2.5 13.0 8.0 84 120.0 10 - 8 085 30 0.79 12.0 13.0 66 150.0 10 - 9 086 30 0.79 11.0 15.0 61 180.0 10 - 10 087 30 0.79 10.0 17.0 57 220.0 10 - 11 088 30 0.79 9.0 21.0 52 270.0 10 - 12 089 30 0.79 8.0 25.0 47 330.0 10 - 13 090 30 0.79 7.0 28.0 45 390.0 10 - 14 091 30 0.79 6.5 35.0 40 470.0 10 - 15 092 30 0.79 6.0 42.0 36 560.0 10 - 16 093 30 0.79 5.0 46.0 35 680.0 10 - 17 094 30 0.79 4.0 60.0 30 820.0 10 - 18 095 30 0.79 3.8 65.0 29 1000.0 10 - 19 096 30 0.79 3.4 72.0 28 ms18130 lt4k phenolic core 0.15 20 - 1 074 50 25.0 525.0 0.03 2450 0.22 20 - 2 075 50 25.0 450.0 0.055 1810 0.33 20 - 3 076 45 25.0 360.0 0.09 1400 0.47 20 - 4 077 45 25.0 310.0 0.12 1225 0.56 10 - 5 078 50 25.0 280.0 0.135 1150 0.68 10 - 6 079 50 25.0 250.0 0.15 1100 0.82 10 - 7 080 50 25.0 220.0 0.22 900 1.0 10 - 8 081 50 25.0 200.0 0.29 785 1.2 10 - 9 082 33 7.9 180.0 0.42 650 1.5 10 - 10 083 33 7.9 160.0 0.50 600 1.8 10 - 11 084 33 7.9 150.0 0.65 525 2.2 10 - 12 085 33 7.9 135.0 0.95 435 2.7 10 - 13 086 33 7.9 120.0 1.20 385 3.3 10 - 14 087 33 7.9 110.0 2.0 300 3.9 10 - 15 088 33 7.9 100.0 2.30 280 4.7 10 - 16 089 33 7.9 90.0 2.60 260
document number: 34189 for tec hnical questions, contact: magnetics@vishay.com www.vishay.com revision: 15-jul-09 3 ms7508x, ms18130, ms14046, ms90538, ms75101 inductors, military, mil-prf-15 305 qualified, type lt, molded, axial leaded vishay dale notes (1) measured with full length lead (2) rated dc current based on the maximum temperature rise as shown in table ms14046 lt10k iron core 5.6 10 -1 128 45 7.9 60.0 0.32 495 6.8 10 -2 129 50 7.9 55.0 0.50 395 8.2 10 -3 130 50 7.9 50.0 0.60 360 10.0 10 -4 131 55 7.9 45.0 0.90 290 12.0 10 -5 132 65 2.5 42.0 1.10 265 15.0 10 -6 133 65 2.5 40.0 1.40 240 18.0 10 -7 134 75 2.5 34.0 2.25 185 22.0 10 -8 135 75 2.5 30.0 2.50 175 27.0 10 -9 136 60 2.5 25.0 2.60 170 33.0 10 -10 137 65 2.5 19.0 3.00 165 ms90538 lt10k iron core 36.0 5 -1 001 60 2.5 15.5 2.50 180 39.0 5 -2 002 60 2.5 14.5 2.60 176 43.0 5 -3 003 60 2.5 13.7 2.70 172 47.0 5 -4 004 55 2.5 13.0 2.75 170 51.0 5 -5 005 55 2.5 12.7 2.85 167 56.0 5 -6 006 55 2.5 12.0 3.00 164 62.0 5 -7 007 55 2.5 11.5 3.15 160 68.0 5 -8 008 55 2.5 11.0 3.30 156 75.0 5 -9 009 55 2.5 10.5 3.70 147 82.0 5 -10 010 50 2.5 10.3 3.90 143 91.0 5 -11 011 50 2.5 10.0 4.30 136 100.0 5 -12 012 50 2.5 9.5 4.50 133 110.0 5 -13 013 60 0.79 8.9 4.90 128 120.0 5 -14 014 65 0.79 8.7 5.20 124 130.0 5 -15 015 65 0.79 8.5 5.45 121 150.0 5 -16 016 65 0.79 8.0 6.05 114 160.0 5 -17 017 65 0.79 7.5 6.40 111 180.0 5 -18 018 65 0.79 7.0 6.75 108 200.0 5 -19 019 65 0.79 6.5 7.10 106 220.0 5 -20 020 65 0.79 6.2 7.45 103 240.0 5 -21 021 65 0.79 5.9 7.80 101 ms75101 lt10k lt10k iron core 3.3 10 -01 169 30 7.9 70.0 0.140 990 3.9 10 -02 170 30 7.9 65.0 0.155 870 4.7 10 -03 171 30 7.9 60.0 0.210 745 5.6 10 -04 172 30 7.9 50.0 0.280 645 6.8 10 -05 173 30 7.9 50.0 0.375 560 8.2 10 -06 174 30 7.9 48.0 0.440 540 10.0 10 -07 175 30 7.9 42.0 0.605 440 12.0 10 -08 176 50 2.5 36.0 1.05 370 15.0 10 -09 177 55 2.5 30.0 1.20 310 18.0 10 -10 178 60 2.5 30.0 1.95 255 22.0 10 -11 179 60 2.5 24.0 2.20 240 27.0 10 -12 180 65 2.5 22.0 2.75 205 standard electrical specifications model ind. (h) tol. (%) military standard military type q min. test freq. l and q (mhz) srf min. (mhz) (1) dcr max. ( ) rated dc current (ma) (2) maximum temperature rise operating temperature range ms75083 0.10 h to 1.0 h = 35 c at + 90 c ambient - 55 c to + 125 c ms75084 1.2 h to 27 h = 15 c at + 90 c ambient - 55 c to + 105 c ms75085 33 h to 1000 h = 15 c at + 90 c ambient - 55 c to + 105 c ms18130 0.15 h to 4.7 h = 35 c at + 90 c ambient - 55 c to + 125 c ms14046 5.6 h to 33 h = 15 c at + 90 c ambient - 55 c to + 105 c ms90538 36 h to 240 h = 15 c at + 90 c ambient - 55 c to + 105 c ms75101 3.3 h to 27 h = 15 c at + 90 c ambient - 55 c to + 105 c
www.vishay.com for technical questions, contact: magnetics@vishay.com document number: 34189 4 revision: 15-jul-09 ms7508x, ms18130, ms14046, ms90538, ms75101 vishay dale inductors, military, mil-prf- 15305 qualified, type lt, molded, axial leaded description - military part number ms75084 -12 lt 10 k 072 military standard inductance value or type grade and class family id number global part number ms75048 -12 ru product family inductance value package code
document number: 91 000 www.vishay.com revision: 11-mar-11 1 disclaimer legal disclaimer notice vishay all product, product specifications and data ar e subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicab le law, vishay disc laims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, incl uding without limitation specia l, consequential or incidental dama ges, and (iii) any and all impl ied warranties, including warran ties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of pro ducts for certain types of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in gene ric applications. such statements are not binding statements about the suitability of products for a partic ular application. it is the customers responsibility to validate that a particu lar product with the properties described in th e product specification is su itable for use in a particul ar application. parameters provided in datasheets an d/or specifications may vary in different applications and perfo rmance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product co uld result in person al injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding the design or manufact ure of the part. please contact authorized vishay personnel t o obtain written terms and conditions regarding products designed fo r such applications. no license, express or implied, by estoppel or otherwise, to any intelle ctual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
